Wrap-Id Pass
Motorcycle Toll Pass Solution
Installation Instructions:

The video below shows the easy process of attaching Wrap-id Pass to your motorcycle.
The video below shows the easy process of removing Wrap-id Pass from your motorcycle.



Wrap-id Pass attaches to the motorcycle quickly and easily. Just wrap, & ride. It takes five simple steps to insert your toll pass transponder into Wrap-id Pass, attach it to your motorcycle & ride. Wrap-id Pass dimensions are; Transponder Pouch - 5 1/4" x 3 1/4" and Wrap(Unfolded) 9" x 3 1/2".

  1. Straighten Wrap-id Pass so that the bands in the self-coiling wrap extend and lock flat.
  2. Fold the self-coiling wrap in the middle and slide the transponder pouch off of the wrap.
  3. Fold back the transponder pouch flap back onto its self and insert your transponder into the weather resistant pouch. Fold the flap back over to its original position.
  4. Fold the self-coiling wrap in the middle and slide your weather resistant transponder pouch back onto the wrap. Ensure the wrap coils up and that your transponder is facing out from the coils.
  5. Press each side of your Wrap-id Pass around the left fork or handlebar risers of your motorcycle to engage the self-coiling wrap attaching Wrap-id Pass to your motorcycle. Now you are ready to ride.

The images below display Wrap-id Pass (1) on the risers and (2) on the fork.  In these positions your toll pass transponder will function properly as you travel through toll express lanes. 
 
 
;

*For best results, fasten Wrap-id Pass to the left-side fork or handlebar risers, with transponder facing forward.
**Not Responsible for unpaid tolls due to improper installation.
***Please observe proper speed limits through toll plazas.
****Patent Pending
Website Builder